-
Panelization & numbering
-
The entire mural will be cut into pieces of approximately 600 mm each.
-
Each piece is numbered—you can install them by arranging the pieces according to the numbers.
-
-
Adhesives (choose based on substrate)
-
Wood board / Plywood: Use silicone sealant, multipurpose adhesive, PVA (white glue), or a wood-board-specific adhesive.
-
Cement wall / Concrete surface: Use tile adhesive (thin-set mortar).
-
-
Important notes
-
Some natural marble or glass tiles are semi-transparent. Choose the adhesive color carefully, as it may show through and alter the original color.
-
Use a neutral (non-corrosive) adhesive to prevent gold-foil mosaic tiles from being corroded.
-
For best results, apply a medium-consistency adhesive evenly to provide uniform support for the mosaic.
-
-
Grouting
-
Mosaic murals can be installed with grout or without grout, depending on the desired effect.
-
If grouting is required, choose a grout color close to the tile color (note: grout color options may be limited):
-
Light-colored tiles: Translucent or light gray grout
-
Dark-colored tiles: Dark gray grout
-
-
For wet areas, a waterproof grout is recommended.
-
Handmade Flower Petals Mosaic Mural – Luxury Floral Wall Art for Interior Feature Walls
-
Chat with Us
-
Securety payments
-
Processing Time: 2 Weeks
Shipping
Shipping & Delivery (U.S. / Europe)
-
Air Freight (U.S. & Europe): fastest delivery within 1 week.
-
Express Air Freight: fastest delivery in 3–5 days.
-
Sea Freight: approximately 4 weeks.
-
Europe Rail/Truck Transport: approximately 4–5 weeks.
Note: Transit times are estimates and may vary due to customs clearance, local delivery schedules, and peak shipping seasons.
Adhesive / Installation
Cutting
-
When cutting glass mosaic tile, use a thin diamond blade designed for glass.
-
Suitable for dry cutting or wet cutting (wet cutting is recommended to reduce chipping).
-
Apply masking tape on the tile surface before cutting to help prevent scratches and reduce movement during cutting.
Care Instructions
Daily Cleaning
-
Clean with warm water + a pH-neutral cleaner using a soft cloth or non-abrasive sponge.
-
A standard glass cleaner may be used for routine maintenance. Dry after cleaning to help prevent water spots and limescale.
Deep Cleaning (Limescale / Soap Scum)
-
Use a non-abrasive descaler and wipe gently, then rinse thoroughly.
-
Avoid letting the cleaner sit on grout for extended periods.
Do Not Use
-
Do not use scouring powders, steel wool, or abrasive pads (may scratch the surface).
-
Avoid prolonged exposure to strong acids or strong alkalis, especially as they may damage or discolor grout.
Note
-
The surface is stain-resistant, but grout lines can trap dirt—clean grout regularly with a soft brush.